Return to the BUILD
“Attach the left hip to the pelvis after constructing the interior joint.”
We have done all of this before on the right leg.
- T-800 Assembly – Model Instructions
- Sci-Fi Cinema Legends – Ghost in the Shell 2: Innocence
- Real World Science – Being Double
Assembling the Left Hip Joint
Retrieve your Left Thigh assembly from the previous issue. Fit the Inner Casing for Hip Joint (flat surface up) around the posts in this opening of the Left Thigh, as shown:
Fit the Hip Joint down into the opening, as shown:
Retrieve your T-800 Endoskeleton. As we did with the right leg, bring this Left Thigh assembly with Hip Joint up to the Left Hip Socket on the pelvis. Rotate the Hip Joint until its slots latch over the tabs inside the socket, then secure it into place with one (1) PM 3×8 mm screw.
This joint will still be loose at this point, that is expected:
Fit the Outer Casing for Hip Joint (flat surface in) around the posts in the opening of the Left Thigh, as shown:
Fit the metal Domed Cap for Hip Joint around the same posts in the opening of the Left Thigh, as shown:
Fit the metal Outer Cap for Hip Joint around the same posts in the opening of the Left Thigh and secure it in place with four (4) PM 2×18 mm screws:
The hip joint should now be secured, but we will add the resistance in the next issue. The two casing are plastic, but everything else in this issue is metal.
Issue 89 – Hip Plate, Left Leg Part/Insert